Tips For Replacing a Window Handle
Changing your window handle is a simple task that can be completed from the at-home comforts of your home. Follow these tips for an easy operation and a beautiful looking finish.
Take off the screw covers from your uPVC handle to expose the screws. Take a measurement of the spindle to be sure you are getting the right size replacement.
1. Take a measurement of the length of the Spindle.
It is essential to have the right size spindle when replacing the window handle. This is because it will determine how tight or loose the handle is, and whether it's able to lock properly within the frame of the window. The spindle is a metallic shaft that connects the handle to the lock inside the window frame. The spindle can be either an industry standard cross-section of 8mm or the older 9mm versions. The current industry standard is 8mm, but this wasn't always the case. When purchasing a new handle, it is essential to verify the measurements.
The easiest way to measure the length of the spindle is to remove the existing handle This can be accomplished by turning it to the open position, then unscrewing the two screws (which may be hidden behind plastic caps that need to be removed) that retain the handle. After the handle is removed, take a measurement from the base to the point at which it ends. This will give you the measurements needed to buy a new one.
There are many options when you are looking to pick the right window handle. From sleek chrome that can fit in with a modern style, to traditional burnished bronze that looks beautiful in restored Georgian rooms, or even the more traditional Tudor Cottages with mongoose tails curled. There are many options, but the most important thing is to pick a style that matches your home's decor.
www.repairmywindowsanddoors.co.uk are typically installed to uPVC windows and are always identical in size with 43mm centers (2 fixings). Cockspur handles range between 58mm and 62mm however there are replacements for both sizes. Window handles made of Cadenza are different in size since they have an angled blade which operates a multi-point locking mechanism inside the window.
Another consideration when selecting the best window handle is knowing which hand you will need to use. This is determined by the hand you use to open the door. Inline Espag handles can be used with right or left-handed windows. Cranked window handles are handed and can only be used on windows that open in one direction.
2. Take the handle off
A window handle that has fallen out is a frustrating experience, regardless of whether the handle is damaged or worn out. The good news is, you can fix a uPVC handle yourself. All you require is a few basic tools and some time to complete the job.
First of all, you need to open the window and ensure that it is in an unlocked position. Next, you need to remove the screws which hold the handle in place. After these have been removed, you are able working on removing the handle itself.
The handle itself is fixed to a spindle in the window frame. This is either fixed with screws or pins dependent on the kind of handle. The most popular types of handles are inline Espagnolette handles and handles with cockspurs. Both of these kinds of handles are used on casement windows, including aluminium windows. You can lock the handles with a key to prevent unauthorised access from outside. Or you can lock the handles by turning them clockwise.
To remove the handle, you will need a flat-bladed screwdriver. Once the clip is released, the handle should slide off the spindle. When the handle is removed, you'll have to determine the length of the spindle and make sure that the new handle is compatible with this size.
Once you have the right size, you can screw the new handle in the correct position. It is important to make sure that the new handle is firmly attached and that it turns in the correct direction (clockwise for open or counterclockwise for closed). It is also crucial to ensure that it has not been fitted upside down.
Then, you must replace the screw cap caps. Once you have done this you can test the handle to make sure that it works properly. You can also test the locking mechanism by shifting the handle from the unlocked position to the locked and back.
3. Remove the Screws
A uPVC window handle is a crucial component of every home and is often the first thing to exhibit signs of wear and wear and tear or damage. This could be due to natural elements or by regular use, or intentional damage caused by criminals who might wish to open a locked window and gain access to your property. However, a simple repair will solve the issue and prevent the issue from happening again.
uPVC handles may also be difficult to remove when the locking mechanisms are not functioning correctly. Often, the problem can be solved by replacing the multipoint lock rather than the entire handle. It's definitely worth a look because it could save you money.
Once you've removed the old handle, you'll have to remove the screws holding it in place. These screws are usually located on the inside of the handle base. It could be necessary to use a screwdriver to accomplish this. Be careful not to over tighten the handle since this could cause it to loosen.
Then you will need to locate the pins or screws that keep the handle in place. They are typically located on the inside of the handle base. You will need a screwdriver to take them off. After they've been removed, you'll need to replace the screw caps if you wish to do so, and then test the new handle to confirm that it's working properly.
Install the handle by adjusting the spindle with the cutout in the window mechanism. Then, screw it in. If you wish to replace the screw covers, make sure the handle is in a slack position and that the screws are securely attached. Once you've completed this, you're all done and you can enjoy your new window handle. This will hopefully help you avoid costly window and door replacements in the near future. Contact us if you require more information about this or any other aspect of your uPVC window.
4. Install the new handle
The procedure of replacing a damaged window handle or updating it is simple and can be accomplished in just a few steps. The first step is to determine the kind of handle, measure its spindle and know what tools you'll need to complete the task. Safety is always the top priority when working with tools and windows. It is also essential to be patient and follow the steps carefully to ensure you have a functioning handle that is safe to use.
The first step is to identify the screws holding your existing window handle in place and remove these, whilst keeping a safe hold on the handle to prevent it from crashing and result in injury. After the screws have been removed, you can put them in a safe location to be replaced in the future.
After the handle that was used previously was removed, you can now begin to install the new one. It is important that the handle fits perfectly to ensure that it is functional and secures the window in its place. The next step is to slide the metal square to the back of the handle into the hole in your window mechanism, ensuring that it is securely in place.
Now that your new handle is in place, the final thing to do is to replace the screw caps and test it to make sure it works. If you're not happy with the results, or if your window does not open or close correctly, call our experts for assistance.
Most homes in the UK have uPVC windows and as such, many of them will require to be replaced at some point due to damage or wear. The process is relatively straightforward and can be done by anyone with a little knowledge of DIY. The most crucial aspect to the success of the procedure is ensuring that you're using a handle that matches the window's size and design. Contact us if are unsure about the type of handle you need. They'll be able guide you through the possibilities.